Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical

Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical
Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical

Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical
Kraken is fully sealed, closed emitter dot sight optimized for defensive and law enforcement use on pistol and long gun applications. Compared to open emitter reflex sights, sealed systems like Kraken are tougher and easier to keep clean and functional in extreme conditions such as immersion in water or mud. Kraken features 3 MOA dot available in Red and includes battery-saving Shake n’ Wake technology. 3 MOA Dot, powered by CR2032 3V battery. 8000+ hours continuous battery life / 20000+ hours with Shake n’ Wake use. Motion sensing “Shake n’ Wake” auto-on / auto-off reticle illumination. 7075-T6 aluminum construction and hardcoat anodized finish. Inserting & Changing the Battery. Kraken uses a CR2032 3V battery which is included in the box but not pre-inserted into the optic. Turn the battery cover counter-clockwise to remove it. Insert the battery with the “+” side facing away from the scope body. Turn the battery cover clockwise to close it. Tighten until snug and no farther, there is no need to torque down on a battery. Confirm that the optic powers on by pressing the brightness UP button. Regardless of how often you are using Kraken, we recommend you replace your battery annually. Press the brightness UP “? ” button to power on. Hold the brightness DOWN “? “button for 3 seconds to manually power off. When the sight is powered back on it will automatically return to the previous brightness level. Kraken is equipped with 10 brightness settings. The two lowest settings are passive aiming compatible with night vision devices. Use the brightness UP”? ” and brightness DOWN “? ” buttons to adjust brightness level. When using low brightness settings ensure sufficient contrast against thetarget. Medium brightness settings are ideal for indoor shooting ranges. The highest two brightness settings are daylight bright and should only be usedin very bright conditions, Using these settings in darker conditions will cause unwanted glare and reticle bloom. After approximately four minutes without sensing movement, Kraken will shut off illumination to save battery life. While “asleep” the battery will draw no power. As soon as movement resumes, the optic will immediately “wake” and resume its previous brightness level. Kraken does not incorporate a timed fully-shutdown feature that requires the user to press a button to wake. Shake’N Wake is seamless and intended to be unobtrusive to the user. Itis not a mode that can be activated and deactivated, it is hard wired into the function of the optic. Shake’N Wake is very sensitive to movement. While wearing a pistol with Kraken mounted, even the body movement of normal breathing is sufficient to keep the optic “awake” and drawing battery power. Kraken must be absolutely still for four minutes before the Shake’N Wake system will shutoff illumination. Closed emitter systems like Kraken cannot mount directly to optic footprints featuring vertical screws to clamp the scope body in place. Because Kraken’s body is completely sealed and nitrogen purged, it features two horizontal screws underneath clamping from the side. These two screws travel through two recoil lugs aligning with slots cut in Kraken’s adapter plates. The twin recoil lug arrangement reduces screw stress on reciprocating pistol slides compared to open emitter reflex optics. Swampfox recommends applying blue threadlocker to all Kraken system screws and torquing them to 10-15 inch pounds. Attach the adapter plateto the optic footprint with the included screws, then attach Kraken to theadapter plate. Three sets of screws are included in the box. #6-32, for use with the RMR footprint adapter on pistol slides. M3, for use with the MOS slide adapter. M3.5, for use with the RMR footprint adapter on Rebel Riser and Rebel Offset mounts. Kraken features a 3 MOA dot reticle. Krakens with a red emitter will feature a ruby red coating on the interior lens. Krakens with a green emitter will feature a silver coating on the same lens. One Minute of Angle is equivalent to approximately 1 at 100 yards, or. 75 at 75 yards. 50 at 50 yards, etc. Kraken is designed to be parallax free at 33 yards. At distances closer than 33 yards, parallax error is very minimal and will not lead to appreciable point of impact shift. At distances past 100 yards, some parallax will be observed, When using your sight at close range, keep in mind that the entire window is available for aiming. Lf you can perceive the reticle anywhere in the window, you can use it as a point of aim. For shooting past 100 yards, keeping the reticle more centered in the window will result in more consistent hits on target. Before cleaning your optic lens, make sure to blow away any dust or grit on the lens to prevent the lens from being scratched while cleaning. Always use a soft cloth when cleaning your lens. Device Type: Closed Emitter Dot Sight. Windage and Elevation Range: 90 MOA. Battery Type: CR2032 3V. Scope Body: Matte Black Hardcoat. 7075-T6 Aircraft Grade Aluminum. Optical Coating: Fully Multi-Coated. Weight: 2.4 Ounces w/o Battery. Working Temperature: -4°F to +140°F. Dot Brightness: 10 settings, 2 NV. Water resistance: IPX7, up to 1 Meter. Dimensions: 1.86″X 1.4″ X 1.2. 2 Yr Real Worid [Shake’N Wake]. 1x Kraken Red Dot Sight. 1x Adjusting “I” shaped Screw. 1x Adjusting “L” shaped Screw. 4x #6-32 EF 5.1mm screws. 4x M3x0.5 EF 5.5mm screws. 4x M3.5×0.6 EF 5.1mm screws. Our items are located in C. Sometimes there may be force majeure factors causing delays in transportation. We accept return at our cost within 14 days. We may deduct up to 100% if any of these situation occur. We are committed to provide the customer with best service possible.
Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical

Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1×20 BRC T2 Footprint

Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1×20 BRC T2 Footprint
Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1x20 BRC T2 Footprint

Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1x20 BRC T2 Footprint
RAIDER 1X20 MICRO PRISM. Reticle Type:CQB Bullet Rise Compensation 6 MOA Dot. Illumination Positions:10 Illumination settings. Brightness Adjustments:Up/Down Digital Press. Shockproof G Forces:1,200Gs. Max Battery Life:35,000 hours. Dimensions:2.56″(length) 2.05″ (width) 2.3″(height)(with 1.1″ mount). Weight:7.69 ounces. Lens:Fully Multi Coated. Specialty Coatings:Anti-fog, hydrophobic, anti-scratch. Field of View at 100 yards:70.7. Eye Relief:3.54. Mounting Footprint:T2 Footprint. Mount Type:1913 Picatinny T25 star bolt. Chassis:Die-cast zinc alloy. Windage/Elevation Movement Range (MOA):’+/- 45MOA/ Total 90MOA Range. Introducing the Raider, a versatile 1×20 micro prism with expansive eye relief for fast and clear sight acquisition. Utilizing etched reticle technology. It features a T-2 footprint for exceptional versatility between mounting platforms. This micro prism distinguishes itself with a die-cast zinc alloy body, providing a robust housing capable of withstanding impacts without loss of function. Available in red or green illumination, the Raider’s etched reticle appears black when the illumination is off. Its Shake N’ Wake auto on/off feature conserves battery life and is perfect for home defense. The Raider’s primary focus is close quarters applications, featuring its Bullet Rise Compensation Reticle, which is ideal for short-barrel. Many optics optimized for close-range engagements fail at attempting to maintain long-range capabilities. However, the central point of the BRC reticle upholds a 50 to 200-yard zero point, keeping the BRC primarily focused on close range engagements while allowing longer distance shots. According to the CDC, approximately one in three people experience some form of astigmatism, which significantly impacts their ability to use red dots. The Raider serves as a great alternative to standard red dots because the reticle is not projected onto the glass and into the user’s eye, but rather illuminated within the optic, preventing a starburst effect. The Raider’s reticle will also not be washed out by a weapon light, unlike red dots. When the light is activated, the reticle remains a black silhouette instead of disappearing. Height-over-bore issues can complicate short-range engagements when zeroed for mid to long range distances. The Raider’s Bullet Rise Compensation reticle features dedicated holds specifically designed for 5, 10, and 15 yards on AR and similar platforms, while still providing a hold for the 50/200 yard zero point. SHAKE N’ WAKE ILLUMINATION. The Raider is available in either red or green illumination, featuring 10 illumination settings. Settings 1 and 2 are NVG-compatible, settings 3 to 8 cater to low-light and indoor applications, and settings 9 to 10 provide daylight brightness. Shake N’ Wake comes standard with the Raider, helping you conserve battery life and maintain an advantage over your opponent. After 225 seconds of inactivity, the illuminator will shut off, leaving the etched reticle to appear black. If the optic detects any movement, it will power back on to the previous illumination setting. Unlike other 1x prisms, the Raider doesn’t compromise on sight picture, boasting an impressive 70.7-foot field of view (FOV) at 100 yards. Combined with its 15mm exit pupil, the Raider allows for quick target acquisition, rivaling red dots in speed. Utilizing the rear diopter, you can operate the Raider with both eyes open, maintaining a high level of situational awareness. The Raider micro prism is built with endurance in mind, featuring a robust die-cast zinc alloy housing that can withstand up to 1200 Gs of force. Unlike standard CNC aluminum optic bodies, the die-cast process used in the construction of the Raider provides a more rugged surface, featuring unparalleled durability. With its tough construction, the Raider is not only prepared to handle the most challenging environments but also offers an exceptional level of reliability. Equipped with the industry-standard T-2 footprint, the Raider offers versatile mounting options, enhanced by the durability of titanium mounting screws on each included riser. The package features a low-profile 1.1″ mount and a medium 1.6″ mount, allowing for immediate customization. Its T-2 compatibility ensures the Raider can be mounted on any suitable mount, riser, or offset. The Raider features a unique lens cover design for user-friendly operation. These innovative covers are connected to the battery compartment for easy stowing. To utilize the optic, you merely remove the front cap and attach it to the battery cap. Then, unfasten the rear cover from the quick-focus diopter and snap it onto the front cap. If you choose not to use the lens covers, you can easily remove the battery cap and slide off the mounting ring. Our items are located in C. Sometimes there may be force majeure factors causing delays in transportation. We accept return at our cost within 14 days. We may deduct up to 100% if any of these situation occur. We are committed to provide the customer with best service possible.
Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1x20 BRC T2 Footprint

Crimson Trace LG-416G Laser Sight

Crimson Trace LG-416G Laser Sight
Crimson Trace LG-416G Laser Sight
Crimson Trace LG-416G Laser Sight

Crimson Trace LG-416G Laser Sight
The Crimson Trace LG-416G Laser Sight is a high-quality optic designed for handguns, specifically featuring a trigger guard mounting for easy and secure attachment. This laser sight model offers both green and red laser options, providing versatility for various shooting scenarios. With the trusted brand of Crimson Trace, the LG-416G is a reliable accessory for enhancing precision and accuracy in your shooting performance.
Crimson Trace LG-416G Laser Sight

Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights

Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights
Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights
Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights
Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights
Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights
Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights
Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights
Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights
Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights

Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights
Police, EMS & Fire. Riflescope Mounts and Bases. Thermal Imaging Rifle Scopes. Red Dot Sight Accessories. Red Dot Sight Mounts. Red Dot Sight Magnifiers. Speed Radar Gun Accessories. Other Sports & Hobbies. Other Lab & Science Items. Microscope Slides & Cover Slip. May not match the actual item listed. This listing is for Model # LS221R-IR. Holosun Dual Laser Sight – Visible & IR. Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR. By adding to cart, I understand, acknowledge, and agree to the Export Policy. Person, and I do not intend to export this product. Holosun Dual Laser Sight with IR is the perfect dual laser sight for your firearm. Holosun Dual Laser Sight with IR comes with one IR laser and one visible laser (red or green) which can be pair perfectly well with Night Vision devices. Featuring fully adjustable windage and elevation, the Holosun Dual Laser Sight with IR has two user adjustable coaxial lasers. Holosun LS221RIR: Dual Red Laser Sight with IR, Black, Small. Features of Holosun Dual Laser Sight with IR. Submersion 5M for 30 minutes. Direct green laser diode. Vibration up to Up to 1000G. Green or Red Laser Class: IIIa. IR Laser/Illuminator Output Power(mw): 0.7. IR Laser/Illuminator Class: 2M. Flashlight Output Power(lum): N/A. Green Laser Wavelength(nm): 520. Red Laser Wavelength(nm): 635. IR Laser Wavelength(nm): 830. Holosun Dual Laser Sight with IR. At OpticsPlanet, we pride ourselves on top-notch brand name products at some of the lowest prices on the internet! However, we know that we owe all our success to our valued customers. Whether you have a question about our products and policies, or you need any support placing, tracking or following-up on your order, we are always here to help! Sign up for our Newsletter. Subscribe to our newsletter to stay up to date with the latest products from OpticsPlanet. Safe & Secure Shopping. We Value Your Privacy.
Holosun Dual Red Laser Sight with IR, Black, Small, LS221RIR Laser Sights

ArmaLaser GTO for Ruger P95 with Rail GREEN Laser Sight with FLX47 Grip Touch On/Off

ArmaLaser GTO for Ruger P95 with Rail GREEN Laser Sight with FLX47 Grip Touch On/Off
ArmaLaser GTO for Ruger P95 with Rail GREEN Laser Sight with FLX47 Grip Touch On/Off
ArmaLaser GTO for Ruger P95 with Rail GREEN Laser Sight with FLX47 Grip Touch On/Off
ArmaLaser GTO for Ruger P95 with Rail GREEN Laser Sight with FLX47 Grip Touch On/Off
ArmaLaser GTO for Ruger P95 with Rail GREEN Laser Sight with FLX47 Grip Touch On/Off

ArmaLaser GTO for Ruger P95 with Rail GREEN Laser Sight with FLX47 Grip Touch On/Off
ArmaLaser GTO GREEN Touch-Activated Laser Sight for Guns & Pistols with Picatinny Rails (cross-notched rails). There’s never been anything like the GTO. GTO fits onto almost any Picatinny Rail. GTO’s brilliance comes from over 75 custom-fit FLXs which activate the laser just by gripping your pistol. Laser Activates by Normally Gripping Your Pistol. No reaching for a switch. No awkward button on the grip. FLX allows GTO to turn on instantly. Patent 9,328,994 Additional Patents Pending. Custom-Fit for your pistol model. Made from the same material as Polymer pistols. FLX’S are made from an Ultra-thin, Ultra-strong NASA-used Polymer with 3M adhesive backing. Will not harm pistol finish, cleaning solvent-resitant. Super strong and stays put. Made with Dupont Zytel. Can be used without a FLX. Laser can also be activated by touching GTO sides. Activate laser by touching either side contact with extended trigger finger. Don’t install the included FLX if you prefer this activation method. Easy to live with. Convenient battery door means never needing to re-adjust laser after baterry changes. Easy to control over windage and elevation. Master kill switch for iron-sights practice. To be defective in either parts or labor.
ArmaLaser GTO for Ruger P95 with Rail GREEN Laser Sight with FLX47 Grip Touch On/Off

Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight

Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight
Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight
Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight
Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight
Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight
Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight
Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight

Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight
The Steiner 9001 Green/IR Aiming Laser Sight is a high-quality laser sight designed for precision in aiming. It features a green laser beam with an illuminated reticle, making it easy to target with clarity. The inclusion of an IR LED illuminator adds an extra level of functionality, enhancing visibility in low-light conditions. With the trusted Steiner brand name, this laser sight is a reliable tool for improving accuracy in hunting and sporting activities. Comes with LEAF® fixed front iron sight.
Steiner 9001 Green/IR Aiming Laser Sight with IR LED Illuminator with LEAF sight

Swampfox Liberty II 1×24 Multi Reticle Red Dot Sight with 10 Brightness Settings

Swampfox Liberty II 1×24 Multi Reticle Red Dot Sight with 10 Brightness Settings
Swampfox Liberty II 1x24 Multi Reticle Red Dot Sight with 10 Brightness Settings

Swampfox Liberty II 1x24 Multi Reticle Red Dot Sight with 10 Brightness Settings
The Liberty ll dot sight, with its innovative design and construction, takes your shooting experience to the next level. Optimized for competition and long gun use, Liberty ll includes features such as a 3 MOA dot or multi-reticle emitter, a slim profile, top loaded battery, durable body, and an expansive 24mm window. 3 MOA dot or Muli-Reticle emitter. Liberty ll uses a CR1632 battery, NOT included in the box and NOT pre-inserted into the optic. Remove the battery cap located on the top of the housing using a T10 Torx wrench or the included S-wing tool. Insert the CR1632 battery with the “+” side facing up into the battery compartment. Then place the battery cap back on and screw clockwise until tight. Confirm that the optic powers on by holding the brightness UP button. Press the brightness UP button to turn on the optic. Hold the brightness DOWN button for 3 seconds to manually turn off the optic. When the optic is powered back on, it will automatically return to the previous brightness level. Liberty ll features Shake N’ Wake, a power-saving function that automatically turns off the illumination after about four minutes of no movement. The optic immediately “wakes up” as soon as movement is detected, without requiring the user to press any button. This feature is seamlessly integrated into the optics function and cannot be activated or deactivated as a separate mode. Liberty ll has 10 brightness settings that can be adjusted using the up and down arrow buttons on the sides of the unit. The first two settings are NV compatible. Settings 3 to 5 ensure adequate reticle contrast in low light environments, while settings 6 to 8 are suitable for indoor ranges and home defense. Settings 9 and 10 are daylight bright and should be used only in very bright conditions to avoid unwanted glare and reticle bloom. RETICLE – 3 MOA. Liberty ll is offered in either a 3 MOA or a multi-reticle variant. The 3 MOA will have red illumination, All Liberty ll models use MOA subtensions. One Minute of Angle is equivalent to approximately 1 at 100 yards, or. 75 at 75 yards. 50 at 50 yards, etc. 3 MOA is 1.5″ at 50 yards, or 3″ at 100 yards. The multi-reticle variant provides 4 reticle options, including a 3 MOA center dot. At 50 yards, a 3 MOA dot is 1.5″, or 3 MOA is 3″ at 100 yards. When changing between reticle options, your subtensions will not change. This allows for reliability and versatility across firearm platforms. To change the reticle, press and hold the UP button for 3 seconds. You will have to stop pressing the button and re-press in order to cycle to the next reticleoption again. Liberty ll comes with four sets of screws in the most common thread size, in case they are needed. M3.5×0.6, Thread Length 10.2mm, T10. #4-40, Thread Length 5.0 mm, T10. #6-32, Thread Length 8.5mm, T10. #6-32, Thread Length 8.0 mm, T10. Before Installation, confirm the firearm is unloaded. Place the optic in the footprint, making sure the screw holes align. Once properly mounted, take the proper screws and begin threading with even pressure through the optic into the slide. Lf none are specified, use blue thread-locker on the screw threads and torque to no more than 15 inch-pounds. Liberty ll is parallax-free at 33 yards, and at closer ranges, the error is minimal and won’t affect the point of impact. However, some parallax will be noticeable beyond 100 yards. The window of Liberty ll is available for aiming at very close ranges, and if you can see the reticle anywhere in the window, it can be used as a point of aim. For consistent hits at longer ranges, it’s best to keep the reticle centered in the window. ELEVATION AND WINDAGE ADJUSTMENTS. To adjust windage, rotate the dial clockwise to move the dot right and counter-clockwise to move the dot left. To adjust elevation, rotate the dial clockwise to move the dot up and counter-clockwise to move the dot down. CAUTION: Do not overtighten your windage or elevation adjustments. PLEASE NOTE: lf you have a Liberty ll model with the multi-reticle function, zero the optic using the center dot. Example: You are shooting at 25 yards and aiming at the center of the target but impacting 2 inches low and 6 inches to the right. You would need to adjust the elevation dial 8 clicks up and the windage dial 24 clicks to the right to compensate for the offset. Before cleaning your optic lens, make sure to blow away any dust or grit on the lens to prevent the lens from being scratched while cleaning. Always use a soft cloth when cleaning your lens. Lf you are noticing that the dot is impartial or star bursting, you might have debris blocking the emitter, To remove this debris without causing compromise to the optics, use a Q-tip and gently brush the emitter. Illumination Settings: 10 Brightness Adjustments: Up/Down digital buttons. Shockproof G forces: 1500 G Force. Battery Type: CR1632 NOT INCLUDED. Max Battery Life: 50,000 Hours. Dimentions: 1.86″x(length)1.20″ x(width) 1.17. Weight: 1.52 oz. Lens Tinting: Multi-Coated Ruby Red – Red Dot. Lens Coating: Fully Multi-Coated/ Anti-fog/ Hydrophobic. Mount Type: Universal RMR footprint. Chassis:7075-T6 aluminum Windage/Elevation Movement: 45 MOA/ Total 90 MOA Range. 1x Liberty II Red Dot – Multi Reticle Sight. 1x “I” Shaped Adjusting Screw. 1x “L” Shaped Adjusting Screw. 4x M3.5×0.6, Thread Length 10.2mm, T10. 4x #4-40, Thread Length 5.0 mm, T10. 4x #6-32, Thread Length 8.5mm, T10. 4x #6-32, Thread Length 8.0 mm, T10. Our items are located in CA, US. Sometimes there may be force majeure factors causing delays in transportation. We accept return at our cost within 14 days. We may deduct up to 100% if any of these situation occur. We are committed to provide the customer with best service possible.
Swampfox Liberty II 1x24 Multi Reticle Red Dot Sight with 10 Brightness Settings