AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM

AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM
AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM
AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM
AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM
AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM
AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM
AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM

AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM
This Comprehensive Optics Package Gives You the Right Tools from Point Blank to Long Range. More information on the LEOS and 4xDM Magnifier below. About the LEOS Red Dot with Laser Sight. The Ultimate Red Dot System that won’t break the bank. Now available with Red Laser or Green Laser! Crisp 2 MOA red dot. Brilliant red targeting laser with W/E adjustment. Integrated riser mount housing. 50K hour max battery life. Flip up lens caps. Tool-free windage & elevation adjustments. The AT3 LEOST is ideal for home defense, tactical & law enforcement, hunting, plinking, competitive shooting, or any shooting scenario where magnification is not required. Optimized for modern sporting & hunting rifles, shotguns, air rifles, and any other firearm with a Picatinny or Weaver mounting rail. Crisp 2 MOA red dot with 6 brightness settings for accurate both-eyes-open shooting. Brilliant red laser enables rapid targeting – perfect for home defense, tight quarters, & low visibility. Crystal-clear fogproof multi-coated optics resist scratches and provide clarity in all situations. Unfailingly maintains zero – even with high-caliber rifles. Precise digital controls for simple control of the sight and integrated laser – switch between red dot only, red dot laser, and laser only modes with the push of a button. Integrated riser mount puts sight at optimal eye level, and provides lower 1/3 cowitness with rifle ron sights (compatible most modern sporting rifle iron sight setups including fixed sights). Tool-free windage and elevation adjustment with integrated screwdriver on W/E caps. Spring-assisted flip-up lens caps provide rapid deployment and superb lens protection. Durable 6061 Aircraft-Aluminum housing with a stealthy matte-black hardcoat anodized finish. Fully waterproof and fogproof – sealed design with nitrogen purged optics. Extra-long battery life – up to 50,000 hours on lowest brightness setting (red dot only); up to 40 hours of continuous red laser use, and 8 hours of continuous green laser use. Shockproof circuitry rated for impacts up to 800 G’s – it can handle any recoil you throw at it. Uses commonly available CR123 lithium batteries – SurefireT CR123A included. Easy thumb screw for secure mounting to any picatinny rail (can tighten by hand, or with a coin or flathead screwdriver). Reticle: 2 MOA Red Dot. Mount height: 1.58 from rail to center of sight tube (Lower 1/3 cowitness with iron sights). Battery life: up to 50,000 hours on lowest setting; up to 40 hours of continuous laser use. Battery Type: CR123A (1 pc) – Surefire 1550 mAH CR123A included. Weight: 8.3 oz. Mounting Length: 1.1 inch / 28 mm. Total Length/Width/Height: 4.3 in / 2.3 in / 3.1 in. Adj Range: /- 50 MOA (total adjustment range 100 MOA). Parallax Free: 25 yds. Field of View: Unlimited. Night Vision Compatible: No. Red Laser Wavelength – 632-650nm. Green Laser Wavelength – 532nm. Green Laser power: 5mw class IIIb. Finish: Matte black anodized. Inside of the box. LEOST Red dot sight. About the 4xRDM Magnifier. Go from fast up close to precise at long range, with AT3’s new 4x Magnifier with QD Mount. Experience the latest and greatest AT3 Red Dot Magnifier, with a new Quick Detach mount and a crystal-clear 4x magnification for any AT3 Red Dot Sight. Easy upgrade to extend the range of any red dot sight with 4X magnification. Quickly transition between short- and long-range shooting scenarios. Just push the button and flip the magnifier over. Spacers are included for Absolute and Lower 1/3 Cowitness Red Dot Sights – whatever your sight height, the magnifier will work! The Quick Detach Mount means you don’t need to carry extra weight if the job doesn’t demand it – just flip the lever to add or remove. Crystal-clear multi-coated optics for a sharp sight picture. Adjustment screws make it simple to center the red dot in the sight picture. Fast focus adjustment ensures a crisp sight image. Sturdy flip-to-side mount with positive locking mechanism, made of durable 6061 T6 aluminum matte anodized finish. Shockproof optic is built to withstand recoil of any weapon, including shotguns and large-caliber rifles. This magnifier is designed for use with the AT3 RD-50 PRO and LEOS Red Dot Sights, as well as many other sights that use riser mounts. The included spacers correspond to most “Absolute Cowitness” and “Lower 1/3 Cowitness” riser heights for red dot sights. Installation of either spacer is simple, and allows you to have more accurate. Objective Lens Diameter: 32 mm. Height: 1.4in from the base center of optic (Absolute Cowitness). With use of spacer, height is 1.57in. Eye Relief: 2.5 in. Exit Pupil: 7.0mm. Weight: 12oz with mount. Optics Coating: Fully multi-coated. Material – 6061 T6 anodized aluminum. Included in the box: QD flip to side mount, 4X magnifier, Hex key, Stamped Wrench, Lens Cleaning Cloth, Spacers, and mounting screws.
AT3T 4x Magnified Red Dot Sight with Laser Kit LEOS + 4xRDM