Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS & Mount Set

On Filed under swampfox
Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS & Mount Set
Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS & Mount Set

Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS & Mount Set
Kraken is fully sealed, closed emitter dot sight optimized for defensive and law enforcement use on pistol and long gun applications. Compared to open emitter reflex sights, sealed systems like Kraken are tougher and easier to keep clean and functional in extreme conditions such as immersion in water or mud. Kraken features 3 MOA dot available in Red and includes battery-saving Shake n’ Wake technology. 3 MOA Dot, powered by CR2032 3V battery. 8000+ hours continuous battery life / 20000+ hours with Shake n’ Wake use. Motion sensing “Shake n’ Wake” auto-on / auto-off reticle illumination. 7075-T6 aluminum construction and hardcoat anodized finish. Device Type: Closed Emitter Dot Sight. Windage and Elevation Range: 90 MOA. Battery Type: CR2032 3V. Scope Body: Matte Black Hardcoat. 7075-T6 Aircraft Grade Aluminum. Optical Coating: Fully Multi-Coated. Weight: 2.4 Ounces w/o Battery. Working Temperature: -4°F to +140°F. Dot Brightness: 10 settings, 2 NV. Water resistance: IPX7, up to 1 Meter. Dimensions: 1.86″X 1.4″ X 1.2. 2 Yr Real Worid [Shake’N Wake]. The Swampfox Rebel Riser Mount was machined from ultra skeletonized 6061 aluminum and is set to match a 1913 Picatinny Rail. All Swampfox Rebel Mounts are designed to be lightweight, durable and versatile. The riser mount features an adaptable R-M-R footprint plate that you can set to either 1.6? Lower 1/3 co-witness height, or 1.4? Absolute co-witness configuration. Direct fit for Liberty / Justice / Kingslayer dot sights. Material:Durable 6061 Aluminum Construction. Color:Matte Black Anodized Finish. Weight:Super light at 1.78 ounces. T15 Star bolts: 10 inch-pounds torque. Optic footprint screw thread pitch: M3.5 x 0.6. Centerline Height Options: 1.60″, 1.40″. Item Package Dimensions L x W x H:? 4.29 x 3.11 x 2.32 inches. Item Dimensions LxWxH:? 2.25 x 3.5 x 4.5 inches. Micro Reflex Dot Sights are not just for pistols. We pulled out all the stops on our Rebel mounts to make sure they were done right. Made with ultra-skeletonized 6061 aluminum set to precision match with 1913 Picatinny rails, Rebel mounts are lightweight, durable, and versatile. Rebel Offset checks all the boxes for a 45° offset dot sight mount. No need to second guess if you are in line with your barrel, we did the math and made sure of it. And southpaws, we didn’t forget about you: the RMR footprint plate on Rebel Offset is reversible, making Rebel Offset a truly ambidextrous mount. Don’t be a Stormtrooper, get rebellious with our badass Rebel mounts, and Seize your Freedom. Direct fit for Liberty / Justice / Kingslayer dot sights / Trijicon RMR / Other RMR footprint red dots. Durable 6061 Aluminum Construction. Matte Black Anodized Finish. Reversible footprint for ambidextrous mounting. Our items are located in C. Sometimes there may be force majeure factors causing delays in transportation. We accept return at our cost within 30 days. We may deduct up to 100% if any of these situation occur. We are committed to provide the customer with best service possible.
Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS & Mount Set

Swampfox Optics Justice II 1x30mm 6 MOA Multi Reticle Red/Green Dot Sight RMR

On Filed under swampfox
Swampfox Optics Justice II 1x30mm 6 MOA Multi Reticle Red/Green Dot Sight RMR
Swampfox Optics Justice II 1x30mm 6 MOA Multi Reticle Red/Green Dot Sight RMR

Swampfox Optics Justice II 1x30mm 6 MOA Multi Reticle Red/Green Dot Sight RMR
The Justice ll dot sight, with its innovative design and construction, takes your shooting experience to the next level. Optimized for competition and long gun use, Justice ll includes features such as a 6 MOA dot, top loaded battery, durable body, and an expansive 30mm window. 6 MOA dot or Muli-Reticle emitter. Brightness Adjustments: Up/Down digital buttons. Shockproof G forces: 1500 G Force. Battery Type: CR1632 NOT INCLUDED. Max Battery Life: 50,000 Hours. Dimentions: 2.07″x(length)1.35″ x(width) 1.37. Weight: 50.95 g. Lens Tinting: Multi-Coated Ruby Red – Red Dot. Lens Coating: Fully Multi-Coated/ Anti-fog/ Hydrophobic. Mount Type: Universal RMR footprint. Windage/Elevation Movement: 45 MOA/ Total 90 MOA Range. 1x Justice II Red Dot – Multi Reticle Sight. 1x “I” Shaped Adjusting Screw. 1x “L” Shaped Adjusting Screw. 4x M3.5×0.6, Thread Length 10.2mm, T10. 4x #4-40, Thread Length 5.0 mm, T10. 4x #6-32, Thread Length 8.5mm, T10. 4x #6-32, Thread Length 8.0 mm, T10. Our items are located in C. Sometimes there may be force majeure factors causing delays in transportation. We accept return at our cost within 30 days. We may deduct up to 100% if any of these situation occur. We are committed to provide the customer with best service possible.
Swampfox Optics Justice II 1x30mm 6 MOA Multi Reticle Red/Green Dot Sight RMR

Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint

On Filed under swampfox
Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint
Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint

Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint
The Justice ll dot sight, with its innovative design and construction, takes your shooting experience to the next level. Optimized for competition and long gun use, Justice ll includes features such as a 6 MOA dot, top loaded battery, durable body, and an expansive 30mm window. Justice ll uses a CR1632 battery, NOT included in the box and NOT pre-inserted into the optic. Remove the battery cap located on the top of the housing using a T10 Torx wrench or the included S-wing tool. Insert the CR1632 battery with the “+” side facing up into the battery compartment. Then place the battery cap back on and screw clockwise until tight. Confirm that the optic powers on by holding the brightness UP button. Press the brightness UP button to turn on the optic. Hold the brightness DOWN button for 3 seconds to manually turn off the optic. When the optic is powered back on, it will automatically return to the previous brightness level. Justice ll features Shake N’ Wake, a power-saving function that automatically turns off the illumination after about four minutes of no movement. The optic immediately “wakes up” as soon as movement is detected, without requiring the user to press any button. This feature is seamlessly integrated into the optics function and cannot be activated or deactivated as a separate mode. Justice ll has 10 brightness settings that can be adjusted using the up and down arrow buttons on the sides of the unit. The first two settings are NV compatible. Settings 3 to 5 ensure adequate reticle contrast in low light environments, while settings 6 to 8 are suitable for indoor ranges and home defense. Settings 9 and 10 are daylight bright and should be used only in very bright conditions to avoid unwanted glare and reticle bloom. Justice ll is offered in either a 6 MOA. The 6 MOA will have Green illumination, All Justice ll models use MOA subtensions. One Minute of Angle is equivalent to approximately 1 at 100 yards, or. 75 at 75 yards. 50 at 50 yards, etc. 6 MOA is 3″ at 50 yards, or 6″ at 100 yards. Justice ll comes with four sets of screws in the most common thread size, in case they are needed. M3.5×0.6, Thread Length 10.2mm, T10. #4-40, Thread Length 5.0 mm, T10. #6-32, Thread Length 8.5mm, T10.
Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint

Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint

On Filed under swampfox
Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint
Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint

Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint
The Justice ll dot sight, with its innovative design and construction, takes your shooting experience to the next level. Optimized for competition and long gun use, Justice ll includes features such as a 6 MOA dot, top loaded battery, durable body, and an expansive 30mm window. Justice ll uses a CR1632 battery, NOT included in the box and NOT pre-inserted into the optic. Remove the battery cap located on the top of the housing using a T10 Torx wrench or the included S-wing tool. Insert the CR1632 battery with the “+” side facing up into the battery compartment. Then place the battery cap back on and screw clockwise until tight. Confirm that the optic powers on by holding the brightness UP button. Press the brightness UP button to turn on the optic. Hold the brightness DOWN button for 3 seconds to manually turn off the optic. When the optic is powered back on, it will automatically return to the previous brightness level. Justice ll features Shake N’ Wake, a power-saving function that automatically turns off the illumination after about four minutes of no movement. The optic immediately “wakes up” as soon as movement is detected, without requiring the user to press any button. This feature is seamlessly integrated into the optics function and cannot be activated or deactivated as a separate mode. Justice ll has 10 brightness settings that can be adjusted using the up and down arrow buttons on the sides of the unit. The first two settings are NV compatible. Settings 3 to 5 ensure adequate reticle contrast in low light environments, while settings 6 to 8 are suitable for indoor ranges and home defense. Settings 9 and 10 are daylight bright and should be used only in very bright conditions to avoid unwanted glare and reticle bloom. Justice ll is offered in either a 6 MOA. The 6 MOA will have Green illumination, All Justice ll models use MOA subtensions. One Minute of Angle is equivalent to approximately 1 at 100 yards, or. 75 at 75 yards. 50 at 50 yards, etc. 6 MOA is 3″ at 50 yards, or 6″ at 100 yards. Justice ll comes with four sets of screws in the most common thread size, in case they are needed. M3.5×0.6, Thread Length 10.2mm, T10. #4-40, Thread Length 5.0 mm, T10. #6-32, Thread Length 8.5mm, T10.
Swampfox Justice II 1x30mm6MOA 4 Reticle Red/Green Dot Optic Sight RMR footprint

Swampfox Justice II 1x30mm6MOA 4 Reticle Red Dot Optic Sight RMR footprint

On Filed under swampfox
Swampfox Justice II 1x30mm6MOA 4 Reticle Red Dot Optic Sight RMR footprint
Swampfox Justice II 1x30mm6MOA 4 Reticle Red Dot Optic Sight RMR footprint

Swampfox Justice II 1x30mm6MOA 4 Reticle Red Dot Optic Sight RMR footprint
Swampfox Justice2 II RMR 6 MOA 1X30 Red Dot OPTIC Sight RMR–JTC2130-6G. The Reticle of JUSTICE II comes in two colors, red is the multi-differentiated version, and green is the dot sight. Elevate your shooting precision with the Justice II-engineered for competition and long gun performance. Boasting a 6 MOA dot, top-loading battery design, rugged 7075-T6 aluminum build, and a massive 30mm window, this optic delivers unmatched clarity and reliability. Shake N’ WakeT Technology – Auto-power-saving mode activates after 4 minutes of inactivity, instantly reactivating on motion detection. Mm Expansive Window – Maximizes field of view for rapid target acquisition. Universal RMR Footprint – Compatible with standard mounting systems for effortless installation. Durable 7075-T6 Aluminum Construction – Built to withstand heavy recoil and harsh environments. MOA Dot Reticle (Green Illumination) – Optimized for quick aiming in various lighting conditions. Anti-Glare Window Serrations – Reduces reflection for distraction-free shooting. Unscrew the top-mounted battery cap using a T10 Torx wrench or included S-wing tool. Insert a CR1632 battery (+ side up) into the compartment. Replace the cap and tighten clockwise. Press the brightness UP button to confirm power activation. Turn On: Press the brightness UP button. Turn Off: Hold the brightness DOWN button for 3 seconds. Automatically remembers the last brightness setting when restarted. SHAKE N’ WAKET TECHNOLOGY. Energy-efficient design ensures the optic powers down after 4 minutes of stillness but instantly reactivates with motion-no button presses needed. Always ready when you are. 10 adjustable levels for every scenario. Settings 1-2: NV (night vision) compatible. Settings 3-5: Ideal for low-light environments (dawn/dusk, shaded areas). Settings 6-8: Perfect for indoor ranges and home defense. Settings 9-10: Daylight-bright intensity (use only in direct sunlight to avoid glare/bloom). RETICLE SPECIFICATIONS – 6 MOA DOT. Green illumination for high contrast in all lighting. MOA Subtensions: 1 MOA = 1 at 100 yards (proportional at shorter distances). The Justice II combines cutting-edge technology with rugged durability, making it the ultimate choice for competitive shooters, hunters, and tactical operators. Shoot faster, aim smarter. Our products are located in Kentucky, USA. If you want to cancel the order after it is placed. Please complete it within 8 minutes. However, if you really want to cancel, you can still return the package intact after receiving it. We accept return at our cost within 30 days. We may deduct up to 100% if any of these situation occur. We are committed to provide the customer with best service possible.
Swampfox Justice II 1x30mm6MOA 4 Reticle Red Dot Optic Sight RMR footprint

Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical

On Filed under swampfox
Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical
Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical

Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical
Kraken is fully sealed, closed emitter dot sight optimized for defensive and law enforcement use on pistol and long gun applications. Compared to open emitter reflex sights, sealed systems like Kraken are tougher and easier to keep clean and functional in extreme conditions such as immersion in water or mud. Kraken features 3 MOA dot available in Red and includes battery-saving Shake n’ Wake technology. 3 MOA Dot, powered by CR2032 3V battery. 8000+ hours continuous battery life / 20000+ hours with Shake n’ Wake use. Motion sensing “Shake n’ Wake” auto-on / auto-off reticle illumination. 7075-T6 aluminum construction and hardcoat anodized finish. Inserting & Changing the Battery. Kraken uses a CR2032 3V battery which is included in the box but not pre-inserted into the optic. Turn the battery cover counter-clockwise to remove it. Insert the battery with the “+” side facing away from the scope body. Turn the battery cover clockwise to close it. Tighten until snug and no farther, there is no need to torque down on a battery. Confirm that the optic powers on by pressing the brightness UP button. Regardless of how often you are using Kraken, we recommend you replace your battery annually. Press the brightness UP “? ” button to power on. Hold the brightness DOWN “? “button for 3 seconds to manually power off. When the sight is powered back on it will automatically return to the previous brightness level. Kraken is equipped with 10 brightness settings. The two lowest settings are passive aiming compatible with night vision devices. Use the brightness UP”? ” and brightness DOWN “? ” buttons to adjust brightness level. When using low brightness settings ensure sufficient contrast against thetarget. Medium brightness settings are ideal for indoor shooting ranges. The highest two brightness settings are daylight bright and should only be usedin very bright conditions, Using these settings in darker conditions will cause unwanted glare and reticle bloom. After approximately four minutes without sensing movement, Kraken will shut off illumination to save battery life. While “asleep” the battery will draw no power. As soon as movement resumes, the optic will immediately “wake” and resume its previous brightness level. Kraken does not incorporate a timed fully-shutdown feature that requires the user to press a button to wake. Shake’N Wake is seamless and intended to be unobtrusive to the user. Itis not a mode that can be activated and deactivated, it is hard wired into the function of the optic. Shake’N Wake is very sensitive to movement. While wearing a pistol with Kraken mounted, even the body movement of normal breathing is sufficient to keep the optic “awake” and drawing battery power. Kraken must be absolutely still for four minutes before the Shake’N Wake system will shutoff illumination. Closed emitter systems like Kraken cannot mount directly to optic footprints featuring vertical screws to clamp the scope body in place. Because Kraken’s body is completely sealed and nitrogen purged, it features two horizontal screws underneath clamping from the side. These two screws travel through two recoil lugs aligning with slots cut in Kraken’s adapter plates. The twin recoil lug arrangement reduces screw stress on reciprocating pistol slides compared to open emitter reflex optics. Swampfox recommends applying blue threadlocker to all Kraken system screws and torquing them to 10-15 inch pounds. Attach the adapter plateto the optic footprint with the included screws, then attach Kraken to theadapter plate. Three sets of screws are included in the box. #6-32, for use with the RMR footprint adapter on pistol slides. M3, for use with the MOS slide adapter. M3.5, for use with the RMR footprint adapter on Rebel Riser and Rebel Offset mounts. Kraken features a 3 MOA dot reticle. Krakens with a red emitter will feature a ruby red coating on the interior lens. Krakens with a green emitter will feature a silver coating on the same lens. One Minute of Angle is equivalent to approximately 1 at 100 yards, or. 75 at 75 yards. 50 at 50 yards, etc. Kraken is designed to be parallax free at 33 yards. At distances closer than 33 yards, parallax error is very minimal and will not lead to appreciable point of impact shift. At distances past 100 yards, some parallax will be observed, When using your sight at close range, keep in mind that the entire window is available for aiming. Lf you can perceive the reticle anywhere in the window, you can use it as a point of aim. For shooting past 100 yards, keeping the reticle more centered in the window will result in more consistent hits on target. Before cleaning your optic lens, make sure to blow away any dust or grit on the lens to prevent the lens from being scratched while cleaning. Always use a soft cloth when cleaning your lens. Device Type: Closed Emitter Dot Sight. Windage and Elevation Range: 90 MOA. Battery Type: CR2032 3V. Scope Body: Matte Black Hardcoat. 7075-T6 Aircraft Grade Aluminum. Optical Coating: Fully Multi-Coated. Weight: 2.4 Ounces w/o Battery. Working Temperature: -4°F to +140°F. Dot Brightness: 10 settings, 2 NV. Water resistance: IPX7, up to 1 Meter. Dimensions: 1.86″X 1.4″ X 1.2. 2 Yr Real Worid [Shake’N Wake]. 1x Kraken Red Dot Sight. 1x Adjusting “I” shaped Screw. 1x Adjusting “L” shaped Screw. 4x #6-32 EF 5.1mm screws. 4x M3x0.5 EF 5.5mm screws. 4x M3.5×0.6 EF 5.1mm screws. Our items are located in C. Sometimes there may be force majeure factors causing delays in transportation. We accept return at our cost within 14 days. We may deduct up to 100% if any of these situation occur. We are committed to provide the customer with best service possible.
Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight RMR and MOS For Tactical

Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1×20 BRC T2 Footprint

On Filed under swampfox
Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1×20 BRC T2 Footprint
Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1x20 BRC T2 Footprint

Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1x20 BRC T2 Footprint
RAIDER 1X20 MICRO PRISM. Reticle Type:CQB Bullet Rise Compensation 6 MOA Dot. Illumination Positions:10 Illumination settings. Brightness Adjustments:Up/Down Digital Press. Shockproof G Forces:1,200Gs. Max Battery Life:35,000 hours. Dimensions:2.56″(length) 2.05″ (width) 2.3″(height)(with 1.1″ mount). Weight:7.69 ounces. Lens:Fully Multi Coated. Specialty Coatings:Anti-fog, hydrophobic, anti-scratch. Field of View at 100 yards:70.7. Eye Relief:3.54. Mounting Footprint:T2 Footprint. Mount Type:1913 Picatinny T25 star bolt. Chassis:Die-cast zinc alloy. Windage/Elevation Movement Range (MOA):’+/- 45MOA/ Total 90MOA Range. Introducing the Raider, a versatile 1×20 micro prism with expansive eye relief for fast and clear sight acquisition. Utilizing etched reticle technology. It features a T-2 footprint for exceptional versatility between mounting platforms. This micro prism distinguishes itself with a die-cast zinc alloy body, providing a robust housing capable of withstanding impacts without loss of function. Available in red or green illumination, the Raider’s etched reticle appears black when the illumination is off. Its Shake N’ Wake auto on/off feature conserves battery life and is perfect for home defense. The Raider’s primary focus is close quarters applications, featuring its Bullet Rise Compensation Reticle, which is ideal for short-barrel. Many optics optimized for close-range engagements fail at attempting to maintain long-range capabilities. However, the central point of the BRC reticle upholds a 50 to 200-yard zero point, keeping the BRC primarily focused on close range engagements while allowing longer distance shots. According to the CDC, approximately one in three people experience some form of astigmatism, which significantly impacts their ability to use red dots. The Raider serves as a great alternative to standard red dots because the reticle is not projected onto the glass and into the user’s eye, but rather illuminated within the optic, preventing a starburst effect. The Raider’s reticle will also not be washed out by a weapon light, unlike red dots. When the light is activated, the reticle remains a black silhouette instead of disappearing. Height-over-bore issues can complicate short-range engagements when zeroed for mid to long range distances. The Raider’s Bullet Rise Compensation reticle features dedicated holds specifically designed for 5, 10, and 15 yards on AR and similar platforms, while still providing a hold for the 50/200 yard zero point. SHAKE N’ WAKE ILLUMINATION. The Raider is available in either red or green illumination, featuring 10 illumination settings. Settings 1 and 2 are NVG-compatible, settings 3 to 8 cater to low-light and indoor applications, and settings 9 to 10 provide daylight brightness. Shake N’ Wake comes standard with the Raider, helping you conserve battery life and maintain an advantage over your opponent. After 225 seconds of inactivity, the illuminator will shut off, leaving the etched reticle to appear black. If the optic detects any movement, it will power back on to the previous illumination setting. Unlike other 1x prisms, the Raider doesn’t compromise on sight picture, boasting an impressive 70.7-foot field of view (FOV) at 100 yards. Combined with its 15mm exit pupil, the Raider allows for quick target acquisition, rivaling red dots in speed. Utilizing the rear diopter, you can operate the Raider with both eyes open, maintaining a high level of situational awareness. The Raider micro prism is built with endurance in mind, featuring a robust die-cast zinc alloy housing that can withstand up to 1200 Gs of force. Unlike standard CNC aluminum optic bodies, the die-cast process used in the construction of the Raider provides a more rugged surface, featuring unparalleled durability. With its tough construction, the Raider is not only prepared to handle the most challenging environments but also offers an exceptional level of reliability. Equipped with the industry-standard T-2 footprint, the Raider offers versatile mounting options, enhanced by the durability of titanium mounting screws on each included riser. The package features a low-profile 1.1″ mount and a medium 1.6″ mount, allowing for immediate customization. Its T-2 compatibility ensures the Raider can be mounted on any suitable mount, riser, or offset. The Raider features a unique lens cover design for user-friendly operation. These innovative covers are connected to the battery compartment for easy stowing. To utilize the optic, you merely remove the front cap and attach it to the battery cap. Then, unfasten the rear cover from the quick-focus diopter and snap it onto the front cap. If you choose not to use the lens covers, you can easily remove the battery cap and slide off the mounting ring. Our items are located in C. Sometimes there may be force majeure factors causing delays in transportation. We accept return at our cost within 14 days. We may deduct up to 100% if any of these situation occur. We are committed to provide the customer with best service possible.
Swampfox Raider Red/Green Circle/Dot Reticle Sight Prism 1x20 BRC T2 Footprint

Swampfox Liberty II 1×24 Multi Reticle Red Dot Sight with 10 Brightness Settings

On Filed under swampfox
Swampfox Liberty II 1×24 Multi Reticle Red Dot Sight with 10 Brightness Settings
Swampfox Liberty II 1x24 Multi Reticle Red Dot Sight with 10 Brightness Settings

Swampfox Liberty II 1x24 Multi Reticle Red Dot Sight with 10 Brightness Settings
The Liberty ll dot sight, with its innovative design and construction, takes your shooting experience to the next level. Optimized for competition and long gun use, Liberty ll includes features such as a 3 MOA dot or multi-reticle emitter, a slim profile, top loaded battery, durable body, and an expansive 24mm window. 3 MOA dot or Muli-Reticle emitter. Liberty ll uses a CR1632 battery, NOT included in the box and NOT pre-inserted into the optic. Remove the battery cap located on the top of the housing using a T10 Torx wrench or the included S-wing tool. Insert the CR1632 battery with the “+” side facing up into the battery compartment. Then place the battery cap back on and screw clockwise until tight. Confirm that the optic powers on by holding the brightness UP button. Press the brightness UP button to turn on the optic. Hold the brightness DOWN button for 3 seconds to manually turn off the optic. When the optic is powered back on, it will automatically return to the previous brightness level. Liberty ll features Shake N’ Wake, a power-saving function that automatically turns off the illumination after about four minutes of no movement. The optic immediately “wakes up” as soon as movement is detected, without requiring the user to press any button. This feature is seamlessly integrated into the optics function and cannot be activated or deactivated as a separate mode. Liberty ll has 10 brightness settings that can be adjusted using the up and down arrow buttons on the sides of the unit. The first two settings are NV compatible. Settings 3 to 5 ensure adequate reticle contrast in low light environments, while settings 6 to 8 are suitable for indoor ranges and home defense. Settings 9 and 10 are daylight bright and should be used only in very bright conditions to avoid unwanted glare and reticle bloom. RETICLE – 3 MOA. Liberty ll is offered in either a 3 MOA or a multi-reticle variant. The 3 MOA will have red illumination, All Liberty ll models use MOA subtensions. One Minute of Angle is equivalent to approximately 1 at 100 yards, or. 75 at 75 yards. 50 at 50 yards, etc. 3 MOA is 1.5″ at 50 yards, or 3″ at 100 yards. The multi-reticle variant provides 4 reticle options, including a 3 MOA center dot. At 50 yards, a 3 MOA dot is 1.5″, or 3 MOA is 3″ at 100 yards. When changing between reticle options, your subtensions will not change. This allows for reliability and versatility across firearm platforms. To change the reticle, press and hold the UP button for 3 seconds. You will have to stop pressing the button and re-press in order to cycle to the next reticleoption again. Liberty ll comes with four sets of screws in the most common thread size, in case they are needed. M3.5×0.6, Thread Length 10.2mm, T10. #4-40, Thread Length 5.0 mm, T10. #6-32, Thread Length 8.5mm, T10. #6-32, Thread Length 8.0 mm, T10. Before Installation, confirm the firearm is unloaded. Place the optic in the footprint, making sure the screw holes align. Once properly mounted, take the proper screws and begin threading with even pressure through the optic into the slide. Lf none are specified, use blue thread-locker on the screw threads and torque to no more than 15 inch-pounds. Liberty ll is parallax-free at 33 yards, and at closer ranges, the error is minimal and won’t affect the point of impact. However, some parallax will be noticeable beyond 100 yards. The window of Liberty ll is available for aiming at very close ranges, and if you can see the reticle anywhere in the window, it can be used as a point of aim. For consistent hits at longer ranges, it’s best to keep the reticle centered in the window. ELEVATION AND WINDAGE ADJUSTMENTS. To adjust windage, rotate the dial clockwise to move the dot right and counter-clockwise to move the dot left. To adjust elevation, rotate the dial clockwise to move the dot up and counter-clockwise to move the dot down. CAUTION: Do not overtighten your windage or elevation adjustments. PLEASE NOTE: lf you have a Liberty ll model with the multi-reticle function, zero the optic using the center dot. Example: You are shooting at 25 yards and aiming at the center of the target but impacting 2 inches low and 6 inches to the right. You would need to adjust the elevation dial 8 clicks up and the windage dial 24 clicks to the right to compensate for the offset. Before cleaning your optic lens, make sure to blow away any dust or grit on the lens to prevent the lens from being scratched while cleaning. Always use a soft cloth when cleaning your lens. Lf you are noticing that the dot is impartial or star bursting, you might have debris blocking the emitter, To remove this debris without causing compromise to the optics, use a Q-tip and gently brush the emitter. Illumination Settings: 10 Brightness Adjustments: Up/Down digital buttons. Shockproof G forces: 1500 G Force. Battery Type: CR1632 NOT INCLUDED. Max Battery Life: 50,000 Hours. Dimentions: 1.86″x(length)1.20″ x(width) 1.17. Weight: 1.52 oz. Lens Tinting: Multi-Coated Ruby Red – Red Dot. Lens Coating: Fully Multi-Coated/ Anti-fog/ Hydrophobic. Mount Type: Universal RMR footprint. Chassis:7075-T6 aluminum Windage/Elevation Movement: 45 MOA/ Total 90 MOA Range. 1x Liberty II Red Dot – Multi Reticle Sight. 1x “I” Shaped Adjusting Screw. 1x “L” Shaped Adjusting Screw. 4x M3.5×0.6, Thread Length 10.2mm, T10. 4x #4-40, Thread Length 5.0 mm, T10. 4x #6-32, Thread Length 8.5mm, T10. 4x #6-32, Thread Length 8.0 mm, T10. Our items are located in CA, US. Sometimes there may be force majeure factors causing delays in transportation. We accept return at our cost within 14 days. We may deduct up to 100% if any of these situation occur. We are committed to provide the customer with best service possible.
Swampfox Liberty II 1x24 Multi Reticle Red Dot Sight with 10 Brightness Settings

Swampfox Optics Blade 1X25 Prism Sight Red/Green Reticle (BPS00125)

On Filed under swampfox
Swampfox Optics Blade 1X25 Prism Sight Red/Green Reticle (BPS00125)
Swampfox Optics Blade 1X25 Prism Sight Red/Green Reticle (BPS00125)

Swampfox Optics Blade 1X25 Prism Sight Red/Green Reticle (BPS00125)
Swampfox Optics Blade 1X25 Prism Sight Red/Green Reticle (BPS00125). Shake N’ Wake feature auto on/off will help conserve battery life, and the etched reticle provides a clear sight picture, benefiting shooters with astigmatism. Blade’s design optimizes reliability and performance, making it a reliable and effective aiming device for any shooter. ILLUMINATION AND SHAKE N’ WAKE. Blade is available in red, green, or amber illumination variants. The two lowest settings offer NV device compatibility, while settings 3 through 8 offer indoor brightness settings, with 9 and 10 being daylight bright for direct overhead light environments. Blade offers a true grab-and-go level of readiness with Shake N’ Wake. After 225 seconds without motion, reticle illumination shuts off to preserve battery life, leaving the etched reticle to remain in black. Any movement at all will wake up the optic, returning it to the previous illumination setting. In a worst-case scenario, the etched reticle will always remain black if the battery were to malfunction or fail. Having an etched reticle gives every user some sort of advantage, whether it is users who suffer from common astigmatism or someone who just wants to be ready for the end of the world. Blade has something to offer for everyone. Blade’s chemically etched reticle and rear diopter make for an ideal sight picture for almost anyone, providing a fast and clear aiming tool.
Swampfox Optics Blade 1X25 Prism Sight Red/Green Reticle (BPS00125)